Resources

Color Options

Please Note: 
The splash pad colors depicted on the following charts are for guidance only. The displayed color will depend on your monitor and browser.

Please Note:
Feature colors are a glossy polished finish on final manufactured product
Pearl or metallic colors available at an additional cost.
Pearl or metallic colors cannot be shown adequately.
The finished color, therefore, may not be as shown here.
We can also custom match other colors to meet your specifications.

Custom Design

If you’re in search of a one-of-a-kind splash pad, our custom design service is the perfect solution for you. Whether you have a specific idea or theme in mind, you can choose to use our stock designs and features or create your own. Our company is committed to providing top-notch Splash pads that are both high-quality and affordable.

As an “American Value Added Manufacturer,” we take great pride in offering more than just imported features. Additionally, unlike other water feature retailers, we produce our own water features right here in the United States.

Installation Information

Spray parks may be set up with a variety of re-circulating and non re-circulating systems depending on your needs and circumstances. Our representative will discuss with you to determine what will best suit your location.

Most Spray Parks or splash pads run off normal pressure.

Each feature is set up so that the actual water flow can be adjusted to your preference.

Turn-key installation services available (contracted separately).

We can also assist you with the installation, help you find a local contractor or work with your contractor of choice with the installation.

Let SEASPRAY be your one-stop shop for all your water features and save $$!!

Spring Start-up Steps

Ready to enjoy the splash pad again? Follow these start-up steps: 

1. Close all valves on the manifold, including the drain valve. 
2. Slowly open the main supply valve. 
3. Open and adjust each valve on the manifold to activate individual features. 

• If equipped, cycle the timer or activation post and adjust as needed. 

1. Run the system until the water runs clear. 
2. Confirm that the drain valve is fully close 

Need Help? 

Our team is happy to assist with winterization, start-up, or ongoing maintenance.

Water Management

Water Systems

SEASPRAY offers a variety of re-circulating and non-re-circulating water management systems for splash pads. Each custom-built splash pad depending on your needs, circumstances, and specifications. Our representatives will help you to determine what will best suit your splash pad park and location.

Winterization Steps

Proper winterization protects your splash pad system from costly freeze damage. Follow these steps carefully: 

1. Turn off the main supply valve to the splash pad. 
2. Open all valves on the manifold, including the drain valve. 
3. If the system has a timer or activation post, cycle it several times until all water stops flowing from the drain valve. 
4. Blow out all lines using air pressure (no more than 20 PSI) to ensure no residual water remains: 

• Connect air to the drain valve. 
• While blowing out, cycle the timer or activation post (if equipped) to release trapped water.
• In areas where the frost line is deeper than your piping, thoroughly clearing water from all lines and features is critical. 

⚠️ CAUTION: Do not pressurize a closed system. At least one valve must remain open while air is connected.